Inverters

  • Inverters

This AC power supply can supply high-quality and stable AC and is suited for datacom units such as routers and servers which demand high reliability (it may not be used otherwise than for communication units).

INV125VA

  • Dimension:185×280×40.8mm
    Weight:2.5kg

overview

By attaching each optional component, it can be mounted to an EIA-standard or JIS-standard 19-inch rack or placed vertically or attached to a wall. The input and output use connectors for easy connection to load equipment.
Fault signals are output from the external signal terminal block, allowing one to monitor the unit's operational status.

INV1000SC

  • Dimension:410×359×43.5m
    Weight:4.6kg

overview

By attaching each optional component, it can be mounted to an EIA-standard or JIS-standard 19-inch or 24-inch rack or placed vertically or attached to a wall. The input and output can be connected to the terminal block, and output connectors are available at the front and back, making connection to load equipment easy. Operational status signals, fault signals and overload state signals are output from the external signal terminal block, allowing one to monitor the unit's operational status.

INV1000-Ⅱ

  • Dimension:480×451×265.75mm
    Weight:43.6kg
    ※The case of redundant systems

overview

It can be mounted to an EIA-standard or JIS-standard 19-inch rack.
A single-unit configuration allows a maximum of 1 kVA output. With a redundant configuration, 1 to 4 kVA output can be supported. A display unit can be embedded on an AC power unit that is not used as a single operator and display various states. Operational status signals, fault signals and overload state signals are output from the external signal terminal block, allowing one to monitor the unit's operational status.

Back to Top